• New hydraulic-powered system

• Self loading

• Available in two sizes: 52-inch and 63-inch working widths

• Designed to be loaded, driven to the site and used without the operator leaving the seat

• Electric switch engages the hydraulically powered distribution drum

• Variable-control valve sets the rotational speed of the drum

• Spreading thickness is independent of tractor and can be varied from a light dusting to ½ inch

• WideSpin 1530 model

• Can be attached to John Deere Pro Gator and Toro Workman utility vehicles

• Features a 19-cubic-foot hopper capacity with a longer, wider opening for easier loading of materials

• Mounting brackets and connectors are used to connect to a utility vehicle

• Can topdress as light as a fertilizer spreader and as wide as 30 feet, allowing to topdress 18 holes as quick as 90 minutes

• Can uniformly apply ¼ inch or more of topdressing as wide as 15 feet

• ProPass 180 low-impact model

• Has a ground pressure rating of 5.6 pounds psi loaded to 3 pounds psi empty

• Load by volume is 18 cubic feet struck, 21 cubic feet heaped

• Load by capacity as much as 2,200 pounds

• Hydraulic requirements are 6 gallons per minute at 2,000 psi

• Attachment mounting system is quick release; no tools required

• Spread width is 15- to 35-feet wide

• Spread depth is from an ultra light dusting to ¼-inch deep

• Tailgate opening is adjustable from ½ to 3 inches

• HS-100-P model

• A 5.5-hp Honda engine and 2-inch-by-2-inch pump provides fast mixing

• Ideal for repairing wear along cart paths and seeding new areas

• Can be pulled by a tractor, ATV or utility vehicle

• 100-gallon skid type

• Seeds 1,300 square feet per load

• Fully loaded weight of less than 10,000 gvw

• 700-gallon tank covering 8,700 to 10,500 square feet per load

• Spray distances as far as 150 feet from the discharge gun

• Hydraulically controlled paddle agitator and liquid recirculation

• Agitator controls at each end of the tank for operator convenience

• Large toolbox in the hitch for storing hoses and nozzles

• Centrifugal pump driven by an in-line common shaft clutch eliminates high maintenance belts and couplings and maximizes horsepower efficiency

• Gate is fully adjustable

• 20-inch-wide conveyor and spinners work together to create a precise spread depth and pattern from a 23-cubic-foot capacity hopper

• Vehicle-mount control system allows user to make adjustments to the spread pattern without stopping or getting off the vehicle

• Dual spinners adjust the spread pattern from 15 feet to 30 feet; tilts 15 degrees up or down

• Metering gate manually adjusts from 0 to 7 inches

• Powered by a 9-hp engine

• Working speed of 4 and 9 mph